MAXDATA QutePC?1000 Betriebsanweisung PDF herunterladen (Seite 74)

74 Configuration Software and Utilities

75MAXDATA PLATINUM 90002R Server System

Enable PEF

This option is used to globally enable or disable platform event ltering.

Enable SEL Event Messages for PEF Actions

When this option is checked, each action triggered by a lter generates an event message for the

action. This allows the occurrence of PEF-triggered events to be logged in the System Event Log if

event logging is enabled.

PEF Startup Delay

This option is used to congure the time in seconds to delay platform event ltering after a system

power up or reset.

The number number of seconds allowed is between 60 and 255. The default is 60 seconds.

Alert Startup Delay

This setting is used to congure the time in seconds to delay sending out alerts after a system power

up or reset.

The number number of seconds allowed is between 60 and 255. 0 indicates no delay.

PEF Action Global Settings

This set of check boxes globally enables PEF actions that can occur when an event lter is triggered.

For a lter to trigger a particular chassis action (power cycle, reset, power down, or diagnostic interrupt)

the global setting must be enabled and the specic chassis action must be selected for the lter. The

chassis actions are congured in the screen that appears after you click Next.

The check boxes allow enabling or disabling of the following:

• Power Cycle: This check box globally enables / disables the Power Cycle action when an event

lter is triggered. The action is enabled when the box is checked.

• Reset: This check box globally enables / disables the system reset action when an event lter is

triggered. The action is enabled when the box is checked.

• Power Down: This check box globally enables / disables the system power down action when

an event lter is triggered. The action is enabled when the box is checked.

• Diagnostic Interrupt: This check box globally enables / disables a diagnostic (non-maskable)

interrupt when an event lter is triggered. The action is enabled with the box is checked.

• Alert: This check box globally enables / disables alerts when an event lter is triggered. The

action is enabled when the box is checked.

Event Filter Settings

The PEF Event Filters Settings screen, shown in the gure below, displays the supported pre-congured

event lters, along with settings associated with the event lters. These associated settings are:

• Whether the lter is enabled or disabled.

• The policy number associated with the lter (required only if alerts are enabled).

• A chassis action that occurs if the lter event occurs.

• Whether alerts are enabled or disabled if the lter event occurs.

The settings associated with a particular lter can be edited. Select the radio button next to a lter

and then clicking the Edit button.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 162 163

Keine Kommentare

MAXDATA QutePC?1000 Betriebsanweisung Seite 74